i have a obd0 jdm b16 bottom end and a obd2 american b16 head i wanted to know if there is a why to convert the bottom end to obd2 since the block comes stock without a crank position sensor on the crank timing gear like on the obd2 cars? the head i conv...
[Tags: conversion, hybrid, obd0, obd1, obd2, swap] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
I'm dropping a D16Y8 into a 1994 Civic LX. The engine I bought did not come with an alternator, and I'm planning to convert the D16Y8 to OBD1. Will the alternator from the B7 PHYSICALLY work on the Y8 block if I have all the right pulleys?
A/C and power...
[Tags: accessories, alternator, bd2, engine, obd1, swap] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
I have searched all through the forums with no luck, so some of you older members probably know this already, so here it goes.
I have an 88CX Si with a B16a swap, first gen with the dual O2 sensors in the header. My plan is to do the OBDII conversion, but...
[Tags: o2-sensors, obd1, obd2, obdii-conversion] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
hey ok so I'm trying to put a 95 obd1 jdm b16a into my 1990 ls
integra what exactly do I have to do this is a complete swap
Its coming out of a 93 integra and it runs fine so my question is
what will I have to do to get it to run
Also I want t...
[Tags: b16a, conversion, ls-integra, obd0, obd1, swap] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
i got a 1995 B18c1 with the matching ecu...i'm going to put it in my 1995 civic CX hatchback so i need a little help....what do i do about the o2 sensor.?...
[Tags: b18c1, obd1, p72] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
Hi guys, any help on this one would be much appreciated. (and i have been searching for a few hours now... just finding info on oil/oil clogs)
Right..
I have a 92-95 EG civic, OBD1
Engine B18cR
Ecu, P73 ob2a, running with obd1/obd2a conversion harness.....
[Tags: civic, ecu, obd1, obd2a, p73] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
I know theres a couple web sites like moates.net PGMFI.ORG but i still have alot of questions. I tried going on pgmfi.org and something is wrong with that site. Anybody know whats good with that? So Getting down to the point I have a 95 4dr with and 92-96...
[Tags: civic, h22a, jdm, obd1, tune] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
So i've found an amazing deal on an 2001 h22a2 swap with 60,000 mi. comes with engine trans axles ecu wiring harness and shift linkage. Im deciding on wether or not to get it. Ive searched and feel completely confident on doin the swap it self but am a l...
[Tags: civic, h22, obd1, obd2, prelude, tuning, wireing] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
$$$$60.00 up for sale i have a 95 integra ls distributor. used and in working condition it includes the cap, rotor, and wires. shipping is $15.00 to the 48 states. paypal preferred. item available in cuyahoga falls ohio 44221 for pickup. email with questi...
[Tags: civic, distributor, integra, obd1, swap] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
I have a D16Y8 in my 97 Civic with an OBD1 conversion. I get a code 14, and the car stalls out unless I keep my foot on the gas when the engine is cold. Idles just fine when the engine warms up. I can clear the code, but it just comes back again when I st...
[Tags: code-14, iacv, obd1, stall] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
Up for grabs is a complete D16z6 swap, comes with Longblock,dizzy, hydro 5speed transmission, both axles "passenger side needs to be replaced" shiftlinkage, etc. Only thing that will not come with the swap is the ECU and Wiring Harness
Asking ...
[Tags: d16, obd1, vtec] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
ok i got a 97 obd2 acura integra rs and i have a 94 obd1 integra gsr swap and i need to know if the shock tower plugs will work if i plug the obd1 engine harness in the obd2 dash harness?...
[Tags: harness, obd1, obd2, swap] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
my 2000 dx hatch had rsx type s engine and tranny in it. i bought shell with all dash (gauge to ecu)wiring intact from the k20 swap. my plan is to put 95 gs-r obd1 b18c1 into the 2000 dx. what will need to be done with dash/ecu wiring cabin side of the f...
[Tags: dash, harness, obd1, obd2b] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
Hey everyone! i am doing an obd1 block and head in a 1997 civic with odb2 wiring. SO i have to switch out the oil pump because the obd1 engine [http://www.honda-tech.com/zerothread/2138040#]> doesnt have that crank sensor. i am going NUTS over here trying...
[Tags: d15b, d16, obd1, obd2] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
So I'm swaping a d16z6 into my '89 crx, currently it has d15b7 I believe. Wondering what I need for the swap new engine is obd1 and I believe the car is obd0?
attached are two pic's one of current engine bay and second is the d16z6
as much info as pos...
[Tags: civic, crx, d15, d16, obd0, obd1] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
Hi all
Im new to the H22 side of honda, neway we got a 92 Prelude Si and it threw a rod. So I was lookin for just a straight replacment but all the junkyards around here want like 1000 or more for an h23. but we can get an h22 for 400$ with wiring harn...
[Tags: automatic-trans, h22a1, h23a1, obd1, swap, vtec, wiring] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
I currently run a b16 obd0. Is there any major benefits of swapping to obd1 on a basically stock motor?...
[Tags: b16a, computer, ecu, electronics, obd0, obd1] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
I am looking for a P75 ECU from a 94-5 Integra Automatic. If you have one you want to sell please let me know. Thanks....
[Tags: auto, ecu-p75, integra, obd1] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
I have an '88 crx si. I'm planning on doing an LS/VTEC conversion. I found a wrecked '90 integra for $300 with 90.000mi, I figured I could do the rear brake swap, front brake swap, and engine swap. Then I found a vtec head off of a 99 civic si for $250. ...
[Tags: swap, obdo, obd1, lsvtec, crx] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
yurrr, lookin to trade ond1 dizzy vtec for integra for obd0 dizzy vtec holla ...
[Tags: dizzy, integra, obd1] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
Having some problems with this swap. All of the connectors on the passenger side compartment fit except one.
One connector is 3 wire (from the car) and the other is 2 wire (from the engine). Does anyone know how to modify this?
Does this have to ...
[Tags: conversion, obd1, odb2] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
hey guys l have a 88 crx and i'm dropping a b18c5 OBD2. My crx is OBD0. I was told to go with OBD2 to OBD1 to get the most rpm out of the motor and it would be less problems the OBD0. Also do i use the wiring harness from my 88 crx si or from the 99 b18c...
[Tags: obd0, obd1, obd2] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
Hey guys, just as the title says, I want to know if a USDM 1996 Del Sol VTEC B16A2 is OBD1 or OBD2.
I'm planning on swapping to a JDM B18C ITR either 96-97 or 98+ but I believe they are both OBD2.
Any thoughts, concerns, opinions are appreciated. Thank...
[Tags: b16a2, dvd hai kich bao chung kieu oanh, del-sol, itr, jdm, obd1, obd2-b18c, usdm, vtec] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
If you notice in my GSR swap for sale thread, I'm giving up on my project since I don't have the $400-500 needed to finish.
This shell has everything EXCEPT the motor. It has the exhaust, wheels, brakes, working electronics and cassette AM/FM radio, po...
[Tags: 92-95, civic-ex, clean-title, ej1, obd1, shell] - Add more TagsAdd TagsCancel
*Note: Tags must be comma (,) seperated. For example: boardtracker, forum search, search engine
Search matches - Showing results 1 - 25 of 27
